Stone newsletter. October 2020
New CMS machine. Combined machine model KosmosJet. Bridge saw + waterjet cutting
New generation of 5-axis combined monobloc sawing machine, entirely managed by a
numerical control:
1. More machining limits thanks to the widest worktop in its class:
4000 mm x 2350 mm
2. Maximum protection against rust: the structure is made of hot-dip galvanized steel,
while the tank is made of stainless steel.
3. Minimum floor installation dimensions of the category: the machine occupies only
36.5 m2
4. Plate loading operations are facilitated thanks to the tilting table
whose height above the ground is only 380 mm
5. The machine is a real one-piece, compact and easy to install; it does not require
no type of foundation, so that it can be immediately operational.
The machine is equipped with an abrasive water jet cutting head which, operates in
combination with the diamond blade, automates the cutting of stone slabs
natural and composite when there are awkward cuts and interior angles.
The machine is designed for all marble works that cut stones
natural, composite and ceramic plates.
For more technical information or to receive a commercial offer, contact us on This e-mail address is being protected from spambots. You need JavaScript enabled to view it or on 00 33 6 64 73 63 77. Thank you
Reopening of the white marble quarry in the Pyrénées-Orientales, France
the Council of State agrees with the operator of Vingrau's quarry
The Council of State returned to the cancellation of the prefectural decree authorizing the reopening of the Nau-Bouques marble quarry, where 28 species of protected flora and fauna are listed.
Disappointment on the side of the Federation for natural spaces and the environment of the Pyrenees-Orientales. This Wednesday, June 3, 2020, the Council of State quashed the decree of the Marseille Court of Appeal which gave reason to the association. And for good reason this decision confirmed the cancellation of the prefectural decree authorizing the full reopening of the white marble quarry of Nau-Bouques (about eight hectares straddling Vingrau and Tautavel).
Ten years and building materials: what you need to know
As you probably know, the decennial ensures the important work of a building site or the inseparable elements of the building for a period of ten years. This protection is generally the business of craftsmen who put their hands to the work and carry out the most important work or likely to have serious consequences on the work in the event of damage. What you may not have known is that material suppliers may also need a decennial. We explain to you.
Building material suppliers: does the ten-year guarantee apply to me?
Whatever type of materials you provide, even more if they are specific, from the moment you have an advisory role in how your materials should be used (techniques, specific instructions, preparation, etc.) by the 'craftsman builder, then your ten-year civil liability may be engaged in the following cases:
• The improper use of your materials has resulted in a disaster impacting the solidity of the structure concerned
• The improper use of your materials has made the object for which the habitat was intended unfit
• The improper use of your materials has damaged an item of equipment inseparable from the frame
As a supplier, you should not take this lightly since the law, within this indicated perimeter, can attribute you the quality of manufacturer, likely to make you responsible.
How long have material suppliers been covered by the 10-year warranty?
Even if the Spinetta law dates from the 1970s and has changed little, in 2018 (February 28 n ° 17-15.962), the Court of Cassation ruled that material suppliers were affected by this obligation in terms of ten-year insurance.
The judgment remains vague after all and depending on the contract with your customers, your responsibility may be waived, however, to avoid any risk which could prejudice you personally (even if you exercise through a legal person), it's best to have up-to-date coverage.
Rocalia report, natural stone fair, in Lyon
Rocalia 2019 is positioning itself more than ever as the meeting point for natural stone in France, organized jointly with Paysalia.
This second edition has kept all its promises and presents a very positive outcome!
An exhaustive and rare quality offer was deployed in a friendly atmosphere where business, creativity and enthusiasm made this edition a unique gathering rich in meetings and exchanges.
29,912 professional visitors to all two fairs came to discover the innovations, technical solutions and quality products from 148 suppliers representing a total of 256 exhibitors and brands.
In a structured market and with a strong need for visibility, Rocalia is a very good promotional tool for the natural stone sector.
Increase in the number of exhibitors: + 18%
36% foreign visitors
Increase in the number of visitors: + 13%
Build in natural stone
Pierre Actual and the Ecole Nationale Supérieure d'Architecture de Paris - Belleville are pleased to invite you to the "Building in stone today" Symposium which will take place on January 24, 2020 from 9:30 am to 5:30 pm at the School National Superior of Architecture of Paris - Belleville (60, boulevard de la Villette - 75019 Paris).