There are no translations available.

Isolants thermiques en rénovation

Par Sophie Trachte et Dorothée Stiermon

Editeur EPFL

 

Ouvrage très technique et très complet sur les différentes techniques et les différents matériaux disponibles en rénovation thermique des constructions. Cet ouvrage décrit avec précisions les caractéristiques des différents matériaux présents sur le marché (isolants organiques, isolants minéraux naturels ou synthétiques, isolants composites, isolants innovants) en les décrivant (avec de nombreuses photos à l’appui) précisant leurs caractéristiques techniques chiffrées, leurs modes d’élaboration, et en balayant un grand nombre de critère permettant d’avancer vers le meilleur choix correspondant au matériau recherché .

Dans un chapitre complet il détaille leur influence sur la qualité de l’air et sur la santé. Il aborde ensuite sur une quarantaine de pages le cycle de vie des différents matériaux et leur impact environnemental.

Il aborde la notion de l’économie circulaire dans la conception et la mise en œuvre de ces différents matériaux.

 

Nombreux tableaux, articles scientifiques et thèses sur le sujet.

 

En annexe figure une liste de fabricants et producteurs

There are no translations available.

Riou glass rentre sur le marché espagnol

 

Aprés une série de rachats de miroiteries en France sur ces 15 dernières années, puis être rentré en Belgique ( Euroglass) et en Italie ( Cappelletti et Roleri ) en 2022, le groupe Riou glass s’attaque maintenant au marché espagnol en rachetant le catalan Vidresif situé à proximité de Géron. Vidresif est une importante miroiterie avec un CA de l’ordre de 25 millions d’Euros. Le groupe Riou transforme chaque année plus de 100 000 tonnes de verre plat dont il produit une grande partie sur son float de Salaise sur Sanne. Il réalisera sur 2023 un CA supérieur à 260 millions d’Euros avec 1300 salariés et 26 unités de production

Bavelloni at GlassBuild AMERICA 2023

 

Bavelloni is pleased to announce its participation in the show  GlassBuild AMERICA 2023, the largest event for the glass, window, and door sectors in North America. Taking place in Atlanta (GA), from October 31 to November 2, 2023, the event will feature Bavelloni America Inc. at booth 3631.

 

On this occasion, Bavelloni will showcase some of its glass edging machinery, including the VE 500 V10 SCS mitering machine. This straight-line edger, suitable for heavy glass, can process flat edge with arrises and chamfers ranging from 0° to 45°. Notably, the SCS version of this machine incorporates an innovative spindle control system (SCS) for enhanced automation. This system ensures automatic wheel positioning, resulting in high quality finishes, minimized production waste, and optimized tool utilization. The Bavelloni VB 350 CNS bevelling machine, known for its efficiency, reliability, reduced maintenance and long lifespan will also be presented. Moreover, visitors will experience live demonstrations of the Bavelloni REV 372 SR cutting table, a very compact, accurate and fast stand-alone bench for straight and shaped cutting of monolithic glass. Also on display, a wide selection of Bavelloni diamond and polishing tooling.

 

Bavelloni’s team of experts will be on hand at our stand throughout the event to welcome guests and provide comprehensive insights into Bavelloni's diverse product portfolio.

 

To gain complimentary access to the exhibition, enter Bavelloni Customer Guest Pass Code 23GBAEXH upon your online pre-registration.

 

 

 

 

 

There are no translations available.

Affutage des forêts diamantés pour le verre plat

La partie active d’un forêt diamanté, celle qui va permettre de percer le verre est constituée de grains de diamant. Ces grains de diamant sont noyés dans un alliage métallique qui a pour objectif de libérer peu à peu le diamant en surface du forêt diamanté de façon à pouvoir percer le verre.

En perçant le verre la partie supérieure du diamant va se briser peu à peu.

Ce liant doit s’user à la même vitesse que le diamant. S’il s’use trop vite il y a trop de diamant en surface et le forêt va s’user très rapidement et il y a un risque que le perçage se fasse avec des écailles. S’il s’use moins vite que les particules de diamant il n’y aura pas assez de grains de diamant en surface et le forêt ne percera plus le verre correctement. Dans ce dernier cas il faut affuter le forêt de façon à user le liant et refaire apparaitre des grains de diamant en surface. On utilise pour cela des pierres synthétiques, généralement en oxyde d’aluminium.

Mais le besoin d’affutage des forêts devrait être rare, du moins pour les meilleurs forêts diamantés. En effet les fournisseurs qui sont dans ce cas utilisent des liants qui s’usent à la même vitesse que le diamant et donc sans besoin d’affutage.

L’affutage est un réel problème dans le cas des perceuses automatiques.

Banner
Banner

CERFAV TECHNICAL PLATFORM, FRANCE

 

THE CERFAV PROPOSES AN EXCEPTIONAL AND UNIQUE MULTI-TECHNICAL PLATFORM IN FRANCE TO TREAT ALL THE GLASS TECHNIQUES AND TO EXPECT AN INEGAL TRAINING PALLET

 

60 M2 GLASS BLOWING WORKSHOP

 

• melting furnace

• Day tank of large capacity (150 liters, 300 kg),

• 2 small and medium capacity melting furnaces,

• 2 rod heater with spark gap,

• 5 heating ovens,

• 1 very large heating oven,

• 1 oven garage,

• 2 annealing arches (1 m3),

• 1 assortment of equipment and tools (iron, pontils, walking sticks, mallets, etc.)

• 1 scraper,

• 2 mechanical presses,

• 1 mobile suction system,

• 1 rolling mill,

• 1 mechanical suction system.

COMPLETION WORKSHOP

FINISH, SIZE, ENGRAVING OF 127M2

• 1 contouring machine (chamfering of parts, up to 2m in diameter),

• 1 diamond saw (blade diameter 400 mm),

• 1 drill press with a wide choice of diamond drills

• 3 belt machines, with a wide choice of grains,

• 6 reels of size, including 1 with electronic variator with diamond grinding wheels or stone,

• 1 double head drum,

• 2 polishing heads with double head,

• 1 demining drum - polishing,

• 4 turntables including 2 blanks (diameter 700 mm) and 2 diamonds (diameter 600 mm),

• 2 engraving drums,

• 1 portable pneumatic sander,

• 1 spray booth.

• 1 UV bonding station, one engraving station with engraving pen

 

WORKSHOP OF GLASS PULP OF 175 M2

• 3 Nabertherm 200 liter glass paste furnaces,

• 1 Nabertherm glass paste furnace 300 liters,

• 1 deciver,

• 1 vacuum pump,

• 1 stock of compatible colored glasses, plaster, etc.

MODEL WORKSHOP

• 1 wooden tower

• 1 virtual modeling arm with force feedback

• 1 3-axis milling machine

THERMOFORMING WORKSHOP

FUSING AND GLASS FOILING OF 57 M2

• 1 large electric oven (2400 x 1200 x 200 mm),

• 3 fusing ovens (1,000 x 540 x 200 mm),

• 1 fusing oven (500 x 500 x 250 mm),

• 1 test oven,

• 1 kit of decorative laminating equipment.

120M2 GLASS WORKSHOP

• 2 light tables (75 x 120 cm),

• a vertical luminous panel (120 x 190 cm),

• 8 large tables (280 x 150 cm),

• suction systems,

• 1 stock of glasses and professional tools,

• 6 hinged swivel arms for welding.

PAINTING AND GLASS SCREEN WORKSHOP

• 1 insole,

• frames (500 x 700 mm),

• 1 dryer,

• 2 suction panels,

 

• 1 casting table for silvering.

CHALUMEAU WORKSHOP

• several types of torches according to

The work to be done (beads, blowing, tube, etc.)

The type of glass (crystal, borosilicate or soda-lime)

WORKSHOP OF SCULPTURE AND ENGRAVING BY SANDING,

• 1 skiving booth (L 1300 x H 1900 x D 2000 mm),

• 2 sandblasting machines with sleeves (L 800 x H 700 x D 700 mm) with suction,

• 1 micro sand.

ACID STARTING WORKSHOP

• 6 work bins in maximum safety and environmental conditions.

FABLAB - COMPUTER ROOM

• 1 MLLASER 80W laser cutting • 2 3D printers (ABS-PLA extrusion) (140x140x140 mm and 285x153x155 mm)

• 1 3D scanner (wide-angle projector, adjustable camera, David Laser Scanner software)

• 1 Hobby 700 milling machine with 3/4 axis Iprocam numerical control (Usable volume: 260 * 400 * 900 mm).

• 1 Sensable haptic arm for 3D virtual modeling with Freeform software

• 10 dedicated and equipped computer stations (OS Windows 8)

• 1 HP LaserJet Pro 400 Color Laser Printer

• 1 web cam HD MICROSOFT LifeCam HD-3000

-> see details of the fablab equipment on the dedicated blog

MECHANICAL WORKSHOP AND MAINTENANCE

• 1 MIG welding machine,

• 1 arc welding machine,

• 3 angle grinders,

• 1 drill press,

• 1 oxy-cutter trolley,

• 1 double-head shredder,

• 1 roller,

• 1 set of electro-portable equipment:

(Planer, sander, screwdriver, circular saw, jigsaw, wood saw, drill, etc.).

PHOTO STUDIO

• 1 shooting table, • 1 latest-generation camera equipped with portrait and macro photography lenses,

• 3 electronic flash units, • reflectors and light boxes

• Large fabric and paper bottoms, etc.

RESOURCE CENTER

• nearly 4,000 books on

Glass (techniques, history, exhibition catalog, artist monographs, industry),

Contemporary art (drawing, painting, installation, exhibition),

Architecture and design,

The history of art,

Other crafts (ceramics, textiles, metal),

The jewel and the bottles of perfume, ...