There are no translations available.

Isolants thermiques en rénovation

Par Sophie Trachte et Dorothée Stiermon

Editeur EPFL

 

Ouvrage très technique et très complet sur les différentes techniques et les différents matériaux disponibles en rénovation thermique des constructions. Cet ouvrage décrit avec précisions les caractéristiques des différents matériaux présents sur le marché (isolants organiques, isolants minéraux naturels ou synthétiques, isolants composites, isolants innovants) en les décrivant (avec de nombreuses photos à l’appui) précisant leurs caractéristiques techniques chiffrées, leurs modes d’élaboration, et en balayant un grand nombre de critère permettant d’avancer vers le meilleur choix correspondant au matériau recherché .

Dans un chapitre complet il détaille leur influence sur la qualité de l’air et sur la santé. Il aborde ensuite sur une quarantaine de pages le cycle de vie des différents matériaux et leur impact environnemental.

Il aborde la notion de l’économie circulaire dans la conception et la mise en œuvre de ces différents matériaux.

 

Nombreux tableaux, articles scientifiques et thèses sur le sujet.

 

En annexe figure une liste de fabricants et producteurs

There are no translations available.

Riou glass rentre sur le marché espagnol

 

Aprés une série de rachats de miroiteries en France sur ces 15 dernières années, puis être rentré en Belgique ( Euroglass) et en Italie ( Cappelletti et Roleri ) en 2022, le groupe Riou glass s’attaque maintenant au marché espagnol en rachetant le catalan Vidresif situé à proximité de Géron. Vidresif est une importante miroiterie avec un CA de l’ordre de 25 millions d’Euros. Le groupe Riou transforme chaque année plus de 100 000 tonnes de verre plat dont il produit une grande partie sur son float de Salaise sur Sanne. Il réalisera sur 2023 un CA supérieur à 260 millions d’Euros avec 1300 salariés et 26 unités de production

Bavelloni at GlassBuild AMERICA 2023

 

Bavelloni is pleased to announce its participation in the show  GlassBuild AMERICA 2023, the largest event for the glass, window, and door sectors in North America. Taking place in Atlanta (GA), from October 31 to November 2, 2023, the event will feature Bavelloni America Inc. at booth 3631.

 

On this occasion, Bavelloni will showcase some of its glass edging machinery, including the VE 500 V10 SCS mitering machine. This straight-line edger, suitable for heavy glass, can process flat edge with arrises and chamfers ranging from 0° to 45°. Notably, the SCS version of this machine incorporates an innovative spindle control system (SCS) for enhanced automation. This system ensures automatic wheel positioning, resulting in high quality finishes, minimized production waste, and optimized tool utilization. The Bavelloni VB 350 CNS bevelling machine, known for its efficiency, reliability, reduced maintenance and long lifespan will also be presented. Moreover, visitors will experience live demonstrations of the Bavelloni REV 372 SR cutting table, a very compact, accurate and fast stand-alone bench for straight and shaped cutting of monolithic glass. Also on display, a wide selection of Bavelloni diamond and polishing tooling.

 

Bavelloni’s team of experts will be on hand at our stand throughout the event to welcome guests and provide comprehensive insights into Bavelloni's diverse product portfolio.

 

To gain complimentary access to the exhibition, enter Bavelloni Customer Guest Pass Code 23GBAEXH upon your online pre-registration.

 

 

 

 

 

There are no translations available.

Affutage des forêts diamantés pour le verre plat

La partie active d’un forêt diamanté, celle qui va permettre de percer le verre est constituée de grains de diamant. Ces grains de diamant sont noyés dans un alliage métallique qui a pour objectif de libérer peu à peu le diamant en surface du forêt diamanté de façon à pouvoir percer le verre.

En perçant le verre la partie supérieure du diamant va se briser peu à peu.

Ce liant doit s’user à la même vitesse que le diamant. S’il s’use trop vite il y a trop de diamant en surface et le forêt va s’user très rapidement et il y a un risque que le perçage se fasse avec des écailles. S’il s’use moins vite que les particules de diamant il n’y aura pas assez de grains de diamant en surface et le forêt ne percera plus le verre correctement. Dans ce dernier cas il faut affuter le forêt de façon à user le liant et refaire apparaitre des grains de diamant en surface. On utilise pour cela des pierres synthétiques, généralement en oxyde d’aluminium.

Mais le besoin d’affutage des forêts devrait être rare, du moins pour les meilleurs forêts diamantés. En effet les fournisseurs qui sont dans ce cas utilisent des liants qui s’usent à la même vitesse que le diamant et donc sans besoin d’affutage.

L’affutage est un réel problème dans le cas des perceuses automatiques.

Enlevée
Banner
Banner

Double glazing lines. Other equipments

 

To carry out double glazing, moreover the line and the pumps other subsidiary machines are required.

The aluminium profile saw.

Manual or automatic machine able to cut the aluminium profile bars

Salt feeding equipment

To feed with salt the profiles or the frames.

The market proposes semi manual machines and also fully automatic systems with a lot of possibilities for exemple:

Independent desiccant filling station for bent spacer frames

Quick and reliable filling due to double-sided drilling into spacer backside

Automatic sealing of the drilling holes with butyl

Fully automated filling of the frames

Time optimised filling process because the frame is filled and transported simultaneously
Suitable for frames made of aluminium, stainless steel and plastic
Automated transfer of the frames to the butyl robots

 

the curving spacer system

To give to the aluminium profile the right shape. Depending the production you can have from a  small manual system up to a fully automatic installation with separate downstream feeding station. Very often supplied with the following machine.

 

The frame builder

To built the frame before the butyl application

Here also a lot of possibilities.

Combined spacer-bending robot for operation with separate downstream feeding station
Possible to choose different profiles (plastic, aluminium or stainless steel)

Bending possible for all corners
Double-head spacer saw for a variety of materials
Possibility to use continuous spacer bars

The Butyler

This machine put the butyl coating on the two sides of the frame, rectangular or shaped.

It can use spacers from 5 up to 24 mm width, with frame guiding for a proper application.

But now moderm profiles are already supplied with butyl

Gas filling system

To improve the double glazing efficiency the adding of a gas instead air between the two glasses are more and more required. This possibility was firstly proposed in north Europe.

The gas can be Argon, Krypton or a gas mixture.

To the gas filling system is added a control system to measure the gas percentage inside the two glasses