To contact us : This e-mail address is being protected from spambots. You need JavaScript enabled to view it or 00 33 664 73 63 77. Merci.

May newsletter. Flat glass and glaziers

SUMMER ACTIVITES CERFAV from 3 up to 13-07

 

This summer, Cerfav proposes glassblowing courses from beginners to advanced level, run by international artists in a range of techniques : glassblowing, casting, stained-glass, fusing, painting on glass, silvering, engraving, flameworking, etc.

From 3 to 13 July, at Vannes-le-Châtel (2 jours from Paris). Low price for all subscription before June 15th.

Structural glass engineering

 

Architects of prestigious buildings – whether in culture, politics or business – have always used glass as a design element. Yet today’s functional buildings tend to have shapes that go much further than pure expediency, and glass is therefore used more and more frequently as a structural support element. Historic, 19th-century examples include the greenhouses at Kew Gardens in London and at Laeken in Brussels: glass engineering of the highest standard and indeed over 130 years old. At the time flat glass was still rather a costly building material. The open greenhouses gave people an idea of state-of-the-art 19th-century engineering and of the owners’ wealth.

But the examples also show that glass helps to integrate a building skilfully into the surrounding landscape without disturbing its visual impact. Glass enlarges premises and provides a connection between the inside and the outside.

 

Glass has symbolic power

Inspired by this type of glass architecture, the renowned architect Frank Gehry recently designed an exhibition building for the Fondation Louis Vuitton in Paris which was opened in 2014 and shows how contemporary glass engineering can be realised at the highest level. Set within plenty of green space on the edge of the Bois de Boulogne, the twelve-part roof structure reminds us of two overlapping sails. Being a self-confessed sailing enthusiast, Gehry wanted to create the impression of a sailing boat moving ahead at full speed.

 

The total area occupied by glass – 13,300 square metres in all – consists of 3,600 panes, none of which are identical. The angle of the bend is different for each pane, ranging from flat to a 3-metre radius.

 

Moreover, the building material had to meet all the relevant safety engineering requirements, stipulated under French law. Gehry therefore decided to use laminated safety glass (LSG) in combination with a strong, highly rigid interlayer, 1.52 mm thick and made of SentryGlas^® ionoplast from Kuraray Europe GmbH. The actual glass is prestressed, with panes that are six and eight millimetres in thickness. To meet the high standards of structural engineering, the LSG had to be freely shaped, using modified bending furnaces.

 

The 6-mm inner pane was given a reflective coat, with white ceramic screenprinting and 50% opacity – an important feature to protect the valuable exhibits from direct sunlight. Moreover, it creates a pleasant, non-glare lighting effect.

To ensure an undisturbed overall visual impact of the individual sails, the design engineers and the architect opted for an adhesive bond between the LSG and the frame and also as a filler for the wide expansion joints. They decided to use sealants from Dow Corning…

 

Rain of towers in La Défense, Paris.

In addition to the tower Saint Gobain whose construction has just begun other towers are under construction (about twenty projects).

We can mention the Alto tower, the Sisters, the tower Air2, the gardens of the arache. Renovation of the Pascal towers. The Hermitage towers are on their side in need of funding.

 

Inauguration of the new Aniche float. la France

After 30 Million Euros of investment for the renovation and modernization of its Aniche float Patrick Dupin, President of Saint-Gobain's Flat Glass sector inaugurated the new Aniche oven on May 25th.

The float is planned for an annual production of 20 million square meters for the building and automotive markets.

After 4 difficult years following the collapse of the automotive glass and glass markets for the building during which Saint Gobain took exceptional measures to preserve the workstations, the commissioning of this new float, the estimated life of which At 20 years confirms the industrial implication of St Gobain in this region which remains one of its cradles.

Saint Gobain's know-how has helped to increase the productivity of this facility by 10%, reduce energy consumption by 25% and CO2 emissions by 20%.

 

The diploma Verrier Creator recognized at the Bac + 2 level, in France

The training program for the arts and techniques of glass is structured by the recognition of the diploma Createur Verrier (formerly European glassmaker). It is now possible to pass a CAP Verre and then the diploma Createur Verrier recognized at the level Bac + 2.
It should be remembered that for almost twenty years, almost all glassmakers installed in France have attended this training at Cerfav; Many of these art craftspeople have followed a training course in apprenticeship, at an artisan and at Cerfav, before attending the Createur Verrier

 

 

A NEW ESTABLISHMENT FROM TECHNAL OPENS ITS DOORS TO ORS AY (91), France

On Friday, March 24, was inaugurated in Orsay (91), on the community of communes of Paris-Orsay, a new space HOUSES OF LIGHT BY TECHNAL *. Inspired by an architect's workshop, this 60 m² sales outlet, dedicated to aluminum joinery TECHNAL, is headed by FERNANDO DA COSTA, President of the company CLOSE2HOME and JOSÉ SALLOT, CFIM's manager and ALUMINIER AGRÉÉ TECHNAL. It is the 9th establishment MAISONS DE LUMIÈRE BY TECHNAL in the Ile-de-France region, testifying to the gradual implantation of the network and the proximity of the brand. This space allows them to: discover a wide choice of solutions (windows, bays, doors, verandas, pergolas, portals, guardrails shutters ...), benefit from the accompaniment and advice Experts on issues related to acoustic comfort, energy performance, accessibility, natural light gain, design ..., design their "carpentry" projects in new as in renovation.

 

 

BAVELLONI SPA SIGNED THE AGREEMENT ON THE PURCHASE OF GLASTON PRE-PROCESSING BUSINESS IN THE USA AND CANADA

The asset purchase agreement of Glaston’s Glass Pre-Processing business in the USA and Canada was signed on 28th April.

 

This negotiation with Glaston Corporation started last February; the deal will be finalized in mid-May 2017 and the business will be transferred to Bavelloni SpA at that time.

 

The new Company, Bavelloni America Inc., based in Greensboro, will be wholly owned by Bavelloni SpA. It will employ 10 people, who will take care of machinery and spare parts sales in North America and provide after-sales services through qualified field technicians.

 

“We believe this operation will greatly contribute toward strengthening our presence on the local market and improve our business growth,” says Mr. Franco Pirola, Partner and Sales Director of Bavelloni.

 

In the same context, it was also agreed that Glaston will continue to act as official Bavelloni distributor in Mexico, Brazil and Singapore.

 

Net sales of the USA and Canada pre-processing business were approximately EUR 4.9 million in 2016.

 

 

Bavelloni SpA provides glass processing technology and services for the architectural, furniture and domestic appliance and solar industries. During over 70 years of operation, we have delivered more than 25.000 glass processing machines to more than 100 countries. Our wide product range includes CNC machines and technologies for cutting, edging, beveling and drilling machines, available as standalone solutions as well as integrated lines.