There are no translations available.

 

Rachat de Diffuver



La famille Riou continue ses achats de miroiteries en France et son maillage du territoire français

Le premier groupe français de façonnage du verre plat RIOU Glass annonce le rachat du transformateur de verre plat Diffuver, domicilié à Marclopt dans le département de la Loire (42).

Après son entrée au capital du miroitier italien Cappelletti & Roleri en mai 2022, et du groupe belge Euroglas fin 2022, RIOU Glass signe une troisième acquisition dans le cadre de sa stratégie de développement RIOU GLASS VERRE 2025. Le premier transformateur indépendant de produits verriers en France vient de réaliser le rachat de la totalité des actions de l’entreprise Diffuver.

L’opération de croissance externe vise à consolider le maillage territorial de l’ETI en France. « Diffuver est un acteur reconnu en Auvergne-Rhône-Alpes avec lequel nous partageons un savoir-faire et les valeurs familiales communes, explique Christine Riou Feron, Présidente de RIOU Glass. Cette acquisition nous permet de parfaire notre maillage territorial déjà composé de 16 sites industriels en France. » Sans compter les sites dans les DOM TOM

Outre l’ancrage géographique, l’acquisition de Diffuver va également permettre de renforcer l’expertise de RIOU Glass dans la réalisation de vitrages de très grandes dimensions pour le marché de la façade, spécialité de Diffuver. Le rachat est enfin un moyen pour le groupe normand de déployer l’ensemble de sa gamme de solutions de vitrage sur le territoire. Une gamme qui s’étend du double au triple-vitrage à très hautes performances à des produits plus techniques et design (vitrages décoratifs pour les portes d’entrée, crédences de cuisine, cloisons…).

Philippe Melon continuera d’accompagner le développement de Diffuver avec à ses côtés Rémi Maximin, directeur du site de Marclopt, et les 40 collaborateurs que compte l’entreprise. « Ambition, passion et esprit de famille sont les valeurs que nous partageons avec le groupe RIOU Glass. Nous mettrons tout en oeuvre pour satisfaire leurs attentes et ainsi à travers eux, continuer cette belle aventure dans le monde du verre » conclut le fondateur de Diffuver.

Diffuver, un savoir-faire de plus de 35 ans dans le verre

Créé en 1986, Diffuver est l’un des acteurs les plus importants de la transformation du verre plat de la région Auvergne-Rhône-Alpes. Présente à Marclopt (42) et à Lyon (69), l’entreprise produit chaque année 100.000 m² de double vitrage. Sur la période 2020-2021, Diffuver a réalisé un investissement de 3 millions d’euros dans son outil de production afin de répondre à la forte demande du marché de la façade pour les verres de grandes dimensions. Un plan d’investissement qui a permis d’agrandir le site industriel de Marclopt et d’installer une table de coupe de verre feuilleté, deux centres d’usinage, ainsi qu’une ligne d’assemblage « Jumbo » de 56 mètres capable de réaliser des verres isolants de 6.000 x 3.210 mm.

 

There are no translations available.

AGC Belgique

 

Le producteur de verre plat a mis une cinquantaine de personnes au chômage technique dans son unité Belge à cause du prix trés élevé de l'énergie

There are no translations available.

Glassman Europe se tiendra en Turquie à Istanbul les 8 et 9 F2VRIER 2023

 

La conférence et le salon seront centrés sur le verre creux

There are no translations available.

Un miroitier qui arrête son activité vend la totalité de son stock de verre plat

 

Stock de verre

150 Plateaux verre clair, 4 mm, 30 Plateaux verre dépoli 4 mm, 14 Plateaux miroir 4 mm, 6 plateaux verre clair 6 mm, 4 plateaux verre extra blanc 6 mm.........

 

 

 

 

Pour plus d'informations nous contacter sur glass@comascotec.com ou au 06 64 73 63 77.

 

Merci

Banner
Banner
Banner

Logo comascotec. Used flat glass machines

 

Flat glass newsletter and glaziers. October 2017

 

 

New products in the bathroom with VitrA

The Swiss Vitra presented on Batimat a connected mirror associated with a mobile phone that allows the display of the weather, traffic, the reminder of his agenda, messaging, but with the possibility to broadcast music, news ....

New AGC float line in Cuneo

On November 3rd, 2017, AGC Flat Glass Italia officially inaugurated its new float line in Cuneo.

After a cold repair process of three months and an investment of around 25 million euros, the new float presents high-end technologies that will enhance the plant's productivity and its environmental impact in addition to improving the performance of the existing product ranges produced in Cuneo.

The opening ceremony was attended by the AGC Group President and CEO, Takuya Shimamura, the Regional President - Building & Industrial Glass Europe, Philippe Bastien, representatives of the local authorities and the press.

A modernised and “greener” plant

During the summer, renovation work was carried out on the Cuneo plant using the most innovative design techniques. The upgraded float line will significantly increase the plant capacity, reducing energy consumption by 25%, with a corresponding positive impact on its performance and product quality.

Lower energy consumption also means a remarkable reduction in atmospheric emissions, with 50% less CO (carbon monoxide), 14% less CO2 (carbon dioxide) and 30% less NOx (nitrogen oxides).

Improved product ranges

The Cuneo site manufactures a wide range of products in various thicknesses, from 3 to 25 millimetres. Besides clear float, the site now also produces the renewed Planibel Linea Azzurra range, a float glass made solely in this plant. Available in thicknesses from 8 to 25 mm, this special glass has a slightly bluish tint.

It is made from nickel-free materials without any inclusions, yielding a unique product that is easy to cut and process. It is therefore particularly suitable for large glazed surfaces and the most refined furniture creations.

In addition to these float products, the plant manufactures SMART solar control glazings as well as Planibel Clearsight, AGC’s anti-reflective glass, thanks to its four high-tech processing lines.

 

Restored competitiveness

“AGC Flat Glass Italia and its Cuneo plant are one of the outstanding features of the Group that I have the honour to lead. I am glad to be here today to celebrate this important goal achieved by the Italian management. This operation will increase our competitiveness on the market. Such a development will allow us to reach two aims: supporting our leadership with high-performance products and contributing to a sustainable future," says Takuya Shimamura, AGC Group's President and CEO.

“Increased capacity, extended range of products, greater energy efficiency and better environmental performance turn this refurbishment into a rebirth for Cuneo’s furnace.

For the whole plant, that importantly means restored competitiveness on the way to long term sustainability,” adds Philippe Bastien, Regional President - Building & Industrial Glass Europe.

 

French glazier Statement of Receivables

MIROITERIE MABILLE FILS located in Camon (80450) was declared in judgment of recovery plan by the court of TRIBUNAL DE COMMERCE AMIENS on 20-10-2017

 

Technical work on aluminum, wood or PVC windows

The CSTB has released a practical guide, "Design and implementation, application of the NF DTU 36.5 standard"

The window plays an important role in reducing energy consumption in the building, not only by the level of thermal insulation but also by their ability to capture solar energy and by providing natural light. The practical guide "Windows in new works" is based on NF DTU 36.5. It develops the implementation of windows regardless of the material used (wood, PVC, aluminum ..) and use (interior, exterior ...)

This book completes this approach by detailing some examples and explaining the checks to be made. It recalls the regulatory context and the requirements in terms of habitability and sustainability.

 

New smart window at Velux

In partnership with Netatmo, specialist in connected objects Velux, well known for its windows and openings for roofs will offer a new window filled with sensors that can interact depending on the humidity, brightness, temperature ...

The integration of voice control is also part of Velux's areas of research.

 

The Feuquière plant, located in the sum will be responsible for the manufacture of this new range.

give the driver excellent all-weather visibility.

 

Saint Gobain equips the new Alstom tramway from Strasbourg (France) to the city of Kehl (Germany).

Saint-Gobain announces that it has equipped its glazings with the new Alstom tramway linking Strasbourg (France) to the city of Kehl (Germany).

For the 12 trains with a length of 45 m, Saint-Gobain supplied the very large windows for windows and doors.

The Group also manufactured the large (4.6 m2), complex-shaped heated glass windshields and cabin side windows that defrost and defog in the winter, ensuring excellent all-weather visibility for the driver. .

 

 

 

French glazier Statement of Receivables

 

MIROITERIE FAURE located in Toulouse (31100) was declared in the Statement of Receivables by the court of TRIBUNAL DE COMMERCE TOULOUSE on 20-10-2017.