There are no translations available.

Miroiterie : Flabeg France qui avait changé de propriétaire en 2007 placé en liquidation judiciaire

 

 

 

Flabeg France, installé à Sarrewerden, dans le Bas-Rhin, était l'un des derniers sites en Europe de production de miroirs de rétroviseurs et de pare-soleil pour l’industrie automobile. L'entreprise a été placée en liquidation judiciaire par la chambre commerciale du tribunal de Saverne. La maison mère, allemande, avait annoncé à la mi-janvier le dépôt de bilan de cette filiale.

There are no translations available.

Cevino achète BMV

 

Le groupe nordiste de produits verriers Cevino Glass avance en région Auvergne-Rhône-Alpes. Il vient de racheter BMV, une entreprise de Feyzin (Rhône) spécialisée dans la trempe du verre plat. Cette activité représente 4 millions d'euros de CA avec plus de 20 salariés.

« Cette acquisition présente un caractère stratégique », témoigne Thierry Gautier, président fondateur du groupe Cevino (Dubrulle...) « BMV permet à Cevino Glass de renforcer sa présence en Auvergne-Rhône-Alpes et d'y jouer des synergies avec Lukora, une entreprise de Tarare, dans le Rhône, acquise en 2020. » Cette dernière, réalise un chiffre d'affaires de 9 millions d'euros avec 50 salariés.

 

There are no translations available.

La miroiterie Targe, championne d’Europe de miroiterie avec Laure Vereecken

 

Travaillant à la Miroiterie Targe, à Lyon, Laura Vereecken est de plus la toute première championne d'Europe de miroiterie. Un titre, obtenu en 2021, qu'elle doit… un peu au hasard.

Dans une profession qui reste encore très masculine, Laura Vereecken est une pionnière. Elle est, et restera, la première à avoir inscrit son nom au palmarès des Euroskills en catégorie miroiterie"Avant 2021, année où j'ai gagné, l'épreuve n'existait pas", indique la jeune miroitière qui, a 26 ans, est salariée de la Miroiterie Targe, à Lyon, depuis deux ans.

Un succès que la Nordiste d’origine doit presque au hasard. "Tout a commencé lors d'une journée portes ouvertes dans un lycée pro de Tourcoing. Je voulais me renseigner sur la sérigraphie ou l'ébénisterie mais je me suis perdu et suis tombée devant le stand de miroiterie." Une révélation.

Pour Laura Verrecken, la divine surprise des Euroskills miroiterie

Un CAP en poche, elle s'inscrit finalement en brevet des métiers d'art et découvre les Worldskills. "C'est un formateur, expert national, qui m'a poussé à m'inscrire." Gagnante de l'épreuve régionale, elle termine ensuite troisième des finales nationales, en 2018, à Caen. "Et là, j'ai eu un coup de chance, puisque les deux candidats qui m'avaient précédé ont déclaré forfait pour les championnats d'Europe."

 

Et une autre médaille d’Or pour la miroiterie Targe

 

le Graal pour Lilian Vallet

Le jeune apprenti, en alternance au sein de la Miroiterie Targe, a remporté la seule médaille d’or régionale pour la filière bâtiment et travaux publics.

Une image parle souvent plus fort que les mots. Pour s’en convaincre, il suffit de jeter un coup d’œil à la cérémonie de clôture des Worldskills et à la joie qui a envahi Lilian Vallet à l’annonce des résultats de l’épreuve de miroiterie. Médaillé d’or, le représentant de la région Auvergne-Rhône-Alpes a eu du mal à cacher son émotion. Dans sa tête défilait sûrement tout le travail parcouru pour arriver à ce fantastique résultat…

Pour lui, tout a démarré à l’âge de 15 ans. "J’ai commencé par un CAP en menuiserie aluminium et verre, au CFA de Dardilly, explique le jeune de 19 ans, originaire de Chalon-sur-Saône. Et j’ai poursuivi par deux ans de BP avant de débuter un bac pro au lycée professionnel Gustave-Eiffel, en alternance au sein de l’entreprise Miroiterie Targe." Un choix de carrière que le tout récent médaillé d’or ne regrette pas. "J’ai découvert le métier de miroitier lors de ma formation au CFA. Ça m’a tout de suite beaucoup plu. Surtout qu’en choisissant cette voie, j’avais la possibilité de participer aux Worldskills."

Ce concours, il l’a pourtant commencé sans vraiment trop y croire. "C’est Laurent Gressard, formateur à Dardilly, qui m’en avait parlé. Mais je me suis lancé un peu comme ça, sans grand esprit de compétition." Rapidement, Lilian Vallet s’est tout de même pris au jeu jusqu’à se préparer pendant des semaines pour la phase deux des finales. "Je savais que pour réussir, il allait falloir être très bon." Et il le serait jusqu’au bout

There are no translations available.

Actionnariat salarié dans le groupe Riou Glass

 

 

La direction du groupe de miroiteries Riou Glass a décidé d’abonder à hauteur de 500 000 Euros afin d’inciter son personnel français ( 1000 salariés environs) à participer au capital de la société.

Selon la présidente du groupe Christine Riou Feron, ceci « a pour objectif de redonner du sens au travail et de partager la création de valeur de la société Riou glass »

 

Banner
Banner
Banner

Logo Comascotec stone processing machines used or new

Stone newsletter. October 2015.

To contact us: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Lava

Description

Lava and its manufacture: the "base" is a volcanic rock which operated blocks are very homogeneous. This is the gray stone that was used for the construction of the Clermont-Ferrand Cathedral. Given its high cost, it is used today as the plates enamelled lava or siding facade constructions. She has a very high mechanical strength - like a granite - and depending on the intended use, it is sawn into plates 15, 20, 25 or 30 mm thick in sizes up to one meter by two. It can be formed very easily by sawing or by cutting with a water jet. It has a very low coefficient of thermal expansion (less than 0.7% at 1000 °) to be considered for mounting on metal supports having a high expansion coefficient. It is a matter - a silicate composition close to a glass-waterproof and very inert to all chemical attack making it an unalterable materials in all weather conditions (frost, radiation, acidity, salinity ...).

 

New Investments for Bovone diamond tools

The company Bovone group specialized in manufacturing diamond tools for the markets of stone and glass continues to grow, especially pulling part of the very good performance of the US market.

The company announced new hiring and investment in a new EDM machine.

 

Diamotech  distributes CMS stone division in France

The tool distribution company for stone Diamotech  (Wettstein family) now distributes the range of CN and saws Italian manufacturer.

CMS that was previously distributed in France by his agent / subsidiary ANTB  and has removed the exclusive distribution of its products.

New setback for antb which was already much less present on the CMS machine market for glass after the departure of its vendor who was not replaced in this market.

 

Bovone edge  polisher

Bovone presented its vertical edge polisher StoneEdge 11/45.

Present on the stone market for several years with machines derived from its core market glass, Bovone presented his first machine designed specifically for the stone market.

It is a polisher vertical edges, polished for gasket and polished chamfer on thickness up to 6 cm.

 

Bisso on Marmomacc

Bisso, one of the oldest bridge saw manufacturer for stone and demonstrated a new dynamism since its integration Comandulli group showed new software for its digital bridge saw Storm.

 

Intermac Donatoni Agreement

Intermac has announced an agreement with Donatoni. On Marmomacc both companies were promoting their new partner on their own stand.

It is true that machines ranges are particularly complementary.

Single trade agreement or capital agreement? The near future should specify.

 

Mamomacc Africa is opening

Marmomacc Africa will open on 2 November in Cairo, Egypt

Over 6.000 sqm of total exhibition area, 3 halls,with 90 exhibitors from 13 different countries (Benin, China, Congo, Egypt, Ethiopia, Germany, India, Italy, Morocco, Poland, Turkey, Saudi Arabia, USA).

 

Comandulli

The undisputed leader of the singing stone polishers for marble and granite continues to grow.

On a larger area stand at Verona Comandulli had the Spira, a horizontal belt polisher for small thicknesses (up to 4 cm) for marcH2 the kitchen and bathroom. With realization of a flat voice with flat or rounded edges and a pin for calibration.

Speed of 0.8 m / min in the 2 cm.

Was also presented the Essential Omega 8-pin (6 + 2). Derived from Omega range, this carpet singing polisher allows for all types of polished edges

 

Sasso machines Marmomacc

Sasso is an Italian company fairly surprising. Arrival on the market there is a decade with a single small vertical polisher, but with a design that breaks with all that was until now the company has grown year after year. In 2015 it was present over a large area with a full range of vertical edge polisher, but also a horizontal polisher, a range of bridge saws and a slabs polisher.

 

MEC Marmomacc

The manufacturer for splitting machines for stone, marble and granite exposed on a larger stand area with a focus on the automation of its splitting machines and the service with a new online service.